15L with inhaler cap

 1. Lay trigger flat against top of can

2. Press inhaler cap to your mouth with the trigger pointing to your chin and the notch under your nose.

3. Depress the trigger with your thumb whilst inhaling for 2 seconds and release whilst exhaling.

4. Repeat 8-10 times and then wait at least 10 minutes before subsequent use.

Repeat as required throughout the day.

15L with mask and tube

1. Insert tube onto nozzle on top of can.

2. Place mask over mouth and nose and secure elastic at back of head.

3. Remove white protective cap from top of can.

4. Depress actuator button whilst inhaling for 2 seconds and release whilst exhaling.

5. Repeat 8-1o times and then wait at least 10 minutes before subsequent use.

Repeat as required throughout the day.

110L with valve, mask and tube

1. Insert tube onto nozzle on top of green regulating valve.

2. Remove white protective tab from the top of the canister.

3. Place mask over mouth and nose and secure elastic at back of head.

4. Screw regulating valve clockwise onto canister. At a point the oxygen will start to flow. Screw tighter or looser to adjust flow.

5. Take 8-10 breaths and unscrew regulating valve counterclockwise to stop flow.

During storage remove regulating valve entirely to prevent accidental leakage.

Select your currency
GBP Pound sterling
EUR Euro